Спецификация зубчатых ремней типа V-belt
Second, Triangle adhesive tape limit smallest diameter of wheel table (Unit:mm)
Variant |
A |
B |
C |
D |
E |
M |
LA |
LB |
LC |
Limit smallest diameter of wheel |
75 |
125 |
200 |
300 |
450 |
38 |
60 |
85 |
125 |
Variant |
HM |
3V |
5V |
8V |
SPZ |
SPA |
SPB |
SPC |
|
Limit smallest diameter of wheel |
70 |
70 |
180 |
300 |
70 |
95 |
175 |
285 |
|
Third, Triangle belt's storage and application
1) Takes care of should pay attention to the important item
1. The triangle adhesive tape should avoid putting in place of the sunlight direct radiation
2. The adhesive tape is best hangs on the wall, or Yu Zhuo on suitable laying aside; Is sure not to pile up the ground,
the backlog laying aside, by against for a long time sets at the distortion aberration.
2) The triangle adhesive tape uses should pay attention to the important item
1. The use big diameter of wheel's belt pulley, reduces in the revolution the adhesive tape to give off heat as
far as possible.
2. When places the belt pulley, must pay attention to two axes parallel, turns the ditch identical straight line,
the adhesive tape and the axis becomes the right angle condition.
3. Wheel of ditch complete set the belt pulley wants the same width with deeply, causes the complete set
adhesive tape loose and tight identical, stress average.
4. Turns the ditch surface to not have the fault smoothly, not durable attrition is sunken in the phenomenon,
and its angle should be in harmony with the standard specification, otherwise the adhesive tape is extremely easy
to wear reduces the life.
5. Evades as far as possible with the idler (loose roller), when must with may not, should put in the adhesive
tape to relax inside of the cross section for suitable.
6. A ditch round bearing and the bearing seat should the regular oil injection maintenance. By what turns smoothly
firmly.
7. When the rubber installs non-periodically, should adjust the belt pulley distance, is sure not to use the tool
to hang forcefully into, in order to avoid harms the adhesive tape.
8. The adhesive tape initially uses abrasion between the flaccid phenomenon which and the adhesive
tape and belt pulley's the extension forms, should adjust according to of the stipulation tightens, should better
start every day before inspected first.
9. The adhesive tape use strip number take compares the predicted value much slightly as suitable, because the
safety coefficient enhancement service life lengthens, the result is instead economical.
10. When replacement triangle adhesive tape, also exchanges on the complete set, new old or the different trade
mark mixes the time, because the extensibility is inconsistent, will reduce adhesive tape's endurance.
11. The triangle adhesive tape is forbid the wax for machine belting or with other lubricants, and should
maintain clean, prevents the greasy dirt, the dust or the chemicals adheres to stick cohere.
12. The triangle adhesive tape and the belt pulley should add the guard shield or grate, by plan security. Adds
when the guard shield should consider to ventilate the question, in order to avoid airtight is not easy to radiate,
affects the adhesive tape life.
Спецификация зубчатых ремней